On many lakes across the U.S. and Canada there are docks that are installed in the Spring and removed within the Fall. Stationary docks that are supported on the bottom of the lake on poles generally come apart in sections that are fairly light and can be carried out by hand. Sometimes large plastic wheels are permanently attached to the bottom of the dock poles. Often the fixed dock is light enough and rigid enough that a 30′ long section can be rolled right out of the lake and stored on the beach for the winter.
Floating docks typically use Inflatable Floating Platform and are either made entirely of polyethylene, or use a wood, aluminum, or composite deck that sits on the top of the plastic floats. Floating docks weigh significantly more per foot than fixed docks. This excess weight causes it to be more challenging to make a long rigid structure that is certainly light enough to become carried out by hand. Usually the longest floating dock sections are limited to about 10 feet. For too long docks, the 10 foot sections are associated with flexible connectors. These docks are generally removed if you take the sections apart and hand carrying them out from the water, one 10 foot section at the same time. In case you have an effortless beach, you might be able to drag the fully assembled dock the beach with the ATV or SUV. Sometimes individuals will use PVC pipe as rollers underneath the dock so the dock lacks to drag on the sand.
You can find manufactures now making floating docks that can have a single rigid section that depends on 32 feet long. These docks are made from structural aluminum bolted together to create a 24″ tall truss running both the length and width in the dock. Polyethylene floats are caged inside the truss system and most common dock materials can be used the deck. These truss type structures are light enough and powerful enough to allow wheels to be mounted beneath the dock. If the dock is intended to be rolled the beach, polyethylene wheels may be mounted similarly to those used on stationary docks. When the shoreline is simply too steep or it is far from convenient to store the dock over the shore, a highway rated axle, wheels, and tires can be installed. The axle is galvanized as well as the bearings are usually protected with a military technology that is designed to maintain positive air pressure in the bearing cavity for just one year of Drop Stitch Fabric. A square or rectangular aluminum tube can be mounted under one end from the dock. This tube behaves as a receiver for any 6′ long trailer tongue that will insert about 2′ then pin into position. You will find a trailer coupler on the extended end from the tongue that is made to connect to a trailer hitch with a standard 2″ ball.
The dock may be towed along the water to your standard boat launch ramp in which the tongue is inserted into the receiver turning the dock into a floating trailer. An easy duty truck or SUV backs on the launch ramp until the coupler can be floated within the trailer ball. The coupler is locked on and also the truck pulls the dock out of the launch ramp much like it was a boat on the trailer. The dock could be towed down the highway two miles or 200 miles. Temporary trailer lights should be installed depending on the distance and terrain traveled.
This new “Rolling Floating Dock” technologies have dramatically reduced the irritation of installing and removing floating docks. Especially benefited are the types waterfront sites that are very steep and possess virtually no beach. Floating Docks can be found which are up to 17′ wide but may be folded up within the launch ramp parking lot to merely 8.5′ wide so no special highway permits gbpman needed. Some docks could also include a large second deck. Big docks that are easy to install and take off can compensate for the beach that many lake front owners wish that they had.
Some manufacturers may even license the dock being a boat letting it be motored round the lake having an outboard and tiller handle. These docks become a safe, fun, and mobile platform for swimming and fishing. While technology is racing around us, it really is nice to see that a few of that technology is giving us safe places to chill out on Inflatable Drop Stitch with our minds at ease realizing that the work of closing up for your winter will be simple and quick.