This automated visual Fiber tensile screening system is designed for operator skill impartial use in production and laboratory configurations. Two basic model configurations enable the consumer to select between a set up for regular linear Proof screening and with additional mandrels for rotary higher power testing.
The linear version is made for creation Proof screening with forces approximately 22 N. Motor-driven clamps with very carefully designed rubberized inserts be sure that the Sheathing Line is not really ruined inside the screening process while at the same time getting rid of the necessity for another air supply. Amounts of tugging force, pulling speed and hold time are automated and easily accessible to the owner from the built-in LCD touch-screen manage. Information from tests can be stored and accessed through the USB dock or Ethernet interface.
Mandrels the exact same style like NYFORS’ optical Fiber recoaters can be installed on the Proof tester inside the rotary high strength configuration. The Fiber is covered around the two mandrels which support it with a special clamping system. By doing this greater lots can be employed onto the Fiber, allowing breaking up power assessments under controlled conditions.
Adjustable clamp placement facilitates screening with the highest force amounts as well as testing of short Fiber measures. The compact and light weight design helps make the instrument easy to maneuver in a laboratory atmosphere as well as incorporate in a production work table in which space reaches a premium. The machine is a compact and lightweight instrument suitable for screening the strength of visual fibers as much as 30 N. The device is created to fulfill all types of programs where a power test needs to be carried out.
The equipment is made using the consumer in mind. The Optical Fiber Ribbon Machine is readily positioned in the guided linear clamps, as well as the testing begins instantly having a “One Touch” go switch. The built-in microprocessor regulates all of the essential guidelines such as tugging force, pulling velocity and hold time. This allows for a totally controlled test every time.
The machine can be linked to an external PC, which allows usage of all automated parameters and configurations. The machine is tailored to face-on your own use or even to the integration into different subsystems. The device has an substantial capability of signing and conserving information such as pulling force, pulling speed and Fiber diameter as well as other guidelines.
Two recoat injector designs can be purchased. The PTR307 uses a computerized pump to inject the recoat materials. The quantity of materials dispensed by the automatic injector is controlled by hand via the top-mounted “Inject” switch or programmed in to the device using the tablet control. The PTR307B comes with a manual recoat shot program that needs the consumer to manually dispense the recoat material into the mold cavity; a substitute injector for the PTR307B recoater is accessible below. Make sure you note the automatic injector is just compatible with high-directory recoat materials, as the manual injector is compatible with both reduced- and- index recoat materials; they are both sold separately below. Please get in touch with Tech Support for additional information.
he handbook injector can be mounted to compatible Fiber recoaters via the 4-40 screws on the recoater real estate (see picture for the right). Make use of a 3/32″ hex key to secure the injector prior to use. To get in touch the PTRRRM to the recoater mold, tighten up the connector at the end of the green plastic material tubing, then loosen by way of a 1/4 consider permit rotation.
The injector is equipped with a syndication device as well as 2-place choice lever for directing the flow of recoat material. A knurled dispensing screw having an inner plunger acts as a syringe for that recoat materials. To fill up the syringe, point the handle downward (i.e., toward the recoat container), then spin the knurled dispensing attach counterclockwise till it spins easily to fill up the syringe (shown inside the picture for the right). Then, to inject the recoat materials to the mold, point the handle horizontally (i.e., dealing with qyjflh knurled attach) and spin the screw clockwise until nearby the finish from the travel range is achieved. Steer clear of bottoming out the dispenser as this may harm the interior plunger; also be careful when re-interesting the threads in order to avoid cross threading the dispensing screw. A number of fill/inject steps may be required till air is displaced inside the system. Use camera lens tissue and an acetone or alcohol cleansing solution to accumulate Secondary Coating Line material that flows from the mold.