If your home has a septic system, pumping the septic tank is a routine upkeep cost that most homeowners plan for. But exactly how much value are you getting out of your septic pumping service? Do they just show up, pump out your tank and then leave? Maybe you’ve never imagined to question.
Once you hire a septic company to perform routine septic pumping services, of course you expect them to pump the solids out of your tank and drive them away. However, when the tank is empty, this is the right time to check for potential issues using the tank and make recommendations to fix the situation before it causes the complete system to fail. It is essential to conduct a three-point check every time your septic tank is pumped: Check the tank baffle(s), gray water to solids ratio, and soil intrusion in your tank.
Tank Baffles – The baffles in your septic tank are designed to prevent solids from flowing in your disbursement system, also referred to as your “leaching field.” Tank baffles are frequently the first part to visit inside the tank. If caught in no time, replacing a baffle is simple and expenses significantly less than replacing a failed leaching field.
Gray Water To Solids Ratio – How frequently you pump your tank may also be estimated by the number of bedrooms or specifically the quantity of people living in your own home and how big your septic tank. Technically, the frequency of pumping depends on the solids to water ratio. A septic tank should never exceed 25% solid waste. This also can cause solids to get in the septic leaching field. By observing this, your septic company must be able to fine-tune your pumping schedule to get additional life from your leaching field.
Ground Water Intrusion – One other issue with septic tanks is groundwater intrusion, which shows as a heavy rust discoloration at the top from the tank. This can be a sign that somewhere the concrete has worn or cracked. Excessive water entering your tank can overload your leaching system. It also can point to your structural problem in your tank or sewage line that can be addressed before it becomes bigger.
Apart from these three checkpoints that are standard with a lot of septic pumping services, in case your septic system has a filter or an effluent pump (if your leaching field is more than your tank you possess an effluent pump) those needs to be cleaned as well. Black water is another flag to look for when pumping your tank. Black water means aerobic bacteria has died kqpmuy the septic tank is not really working correctly. Quite often this points to some ventilation problem.
On the average, a four bedroom home using a 1500 gallon tank is normally pumped every 2 to 3 years. Proper septic system care and maintenance can extend the life span of the septic system five, ten, or even fifteen years over a septic system that is certainly neglected. If you’re uncertain how frequently your tank ought to be pumped, give your neighborhood septic company a call. A professional company needs to be prepared to send someone to go to your home and check with you.